"Ikura" From Silica Gel and Coloring Resin Clay

I opened up the packet of silica gel last night and was feeling brave enough to attempt to color a batch of my own. The packet I obtained from Daiso contained mostly clear gel beads and I used a bit of Tamiya Clear X-27 Red to dye the beads. I poured enough beads to cover one layer of the small sauce cup I was using to dye them and enough paint to just stain a thin layer of the bottom of the cup.

Didn't take any process photos since I was expecting a failure since the paint or the beads may clump or just chip off or it might not stick properly to the gel beads.

I was unexpectedly treated to a surprise after the beads dried.

The gel beads are not all same in size so some are very very tiny, like microbeads, which others are large. I left the clumped beads to dry on their own and then ''unclumped'' these by pressing them between my fingertips. Three to four of the beads broke on impact in fact -- maybe there was some strange reaction between the paint and the beads (I have no idea...) But most of them were nicely and evenly colored. ^^

The other thing I accomplished tonight was to try out a couple of new paint mediums on Grace Clay. Unexpectedly, a few small drops to and fro was able to make these tiny lumps of clay achieve a brilliant and deep, or a light and delicate color. (No - they aren't expensive paints!) I made mostly fruit colored lumps for use in the danishes later.

Wish I had made rainbow colours indeed -- but I will have kind of no use for the blues eh ^^;